Search:

|

中文版

|

English | Favourites |

Homepage

About

News

Products

Article

Download

Stories

Contact

Products
PM measurement Equipment
DC Hysteresisgraph
AC Hysteresisgraph
Surface Magnetic measuring Equipment
Silicon Steel Sheet Magnetic Testing Equipment
Monolithic silicon steel Tester
Teslameter/ Gauss Meter
Battery PeriodicTesting Instrument
Digital Magnetic Fluxmeter
Magnetic Power
Electromagnet
Transformer Testing Equipment

Location: Homepage----CTEST-----TYUTEST

点击看大图

TYU-2000M Automatic Measuring Equipment

【Information】
TYU-2000M Type Automatic Measuring Equipment for Magnetism of Silicon Steel Sheets

 

The TYU-2000M type automatic measuring equipment for magnetism of silicon steel sheets made by Luodi Tianyu Electron adapt to measure the magnetic induction Bmtotal loss ratio Ps of all kinds of hot rolling or cold rolling, orientation or non-orientation material of silicon steel sheets and it can draw ac magnetization curve, loss curve, magnetic hysteresis loop and permeability curve and print the testing report in various form. This device adopts computer control technology and A/D sampling, and it measure the band of electrical piano steel(strip)in Epstein method meanwhile it introduce a special feedback design on power supply to make sure the flux waveforms keep sine-wave. The whole measure process can be finished automatically. Measuring time and output voltage is better than 2×10-4; waveform distortion, loss measurement, waveform factor are better than 3×10-2.

This device is design and made according to the IEC standard IEC404-2 and National standard GB/T 3655-92.

Main technical indexes

Device Name

TYU-2000M type automatic measuring equipment for magnetism of silicon steel sheets

Measuring material

Soft magnetic material such as silicon steel sheet and so on.

Measurement parameters output graphics

Total Loss PsMagnetic Induction Bm and Auxiliary Parameters HcBrUmMagnetization CurveLoss Curve Magnetic Hysteresis LoopPermeability Curve

Standard

BrHcbHcjHci),(BHmJsmagnetic hysteresis loop and demagnetization curve

Sample Shape

280×30mm or 300×30mm Epstein Sample, half or a full Silicon steel sheet,  ring sample

Magnetization device

epstein square loop, wire winding 500mm×500mm permeameter 1000mm×1000mm permeameter

Measuring frequency

50Hz--1kHz,calibration0.1Hz

 

Standard

National Standard GB/T 3655-92 and IEC standard IEC404-2

Power output

Output voltage: 1-200V, power capacity: 500VA-1000VA

Measurement error

Voltage:<±0.2%,current:<±0.3%

Device Configuration 

Name

TYU-2000M type automatic measuring System for magnetism of silicon steel sheets

Computer

The computer adopts the popular Standard configuration of the market. Customers can have some choices if there is other requirement.

Printer

Laser printer or color ink jet printer can be chose.

AD/DA Interface

Resolution is 12Bit, linear degree is ±1/2LSB

Excitation Power Supply

Output Voltage: 1-200V, Power Capacitance is 500VA-1000VA. over voltageover currentshort-circuit protection, high stability,  

Magnetization

Device

Epstein Square Loop, Wire Winding or Permeameter(Can be chose)

Measuring Software

The Chineselization of the measuring software adapt to work under WIN98/2000/XP.The Chinese indication can be followed during the whole process and it can realize the high-speed output of the date .The instruction of using and maintenance. vulnerable component

Main technical indexes 

Measurement error

Ps

Bm

Br

Hc

Um

Uncertainty

1.0%

0.5%

1.0%

1.5%

2.0%

Repeatability

±0.3

±0.2%

±0.3%

±0.5%

±0.3%

Attached Drawing of the Software

The relation curve of magnetic induction, magnetic field and iron loss


Copyright©Hunan Loudi Tianyu Electronic Co.,LTD  ADD:wanbao,loudi,hunan,china TEL:+86.7388924888 FAX::+86.7388924999 Email:hntianyu@vip.sina.com